Patio. Tuesday , August 22nd , 2017 - 14:41:51 PM
Perhaps the concrete is basically sound, but has a few hairline cracks. In that case you can lay porcelain or stone tiles over the top, to give an elegant finish to your patio. It's a good idea to use tiles with a textured finish, to reduce the risk of slipping when the tiles are wet. You can use other materials such as sandstone, limestone, granite or slate, as long as they are properly sealed. If you often have freezing conditions over winter, then ensure the tiles don't absorb high levels of water, or they might crack. Be aware, too, that existing cracks in the concrete may expand and cause the tiles on top to crack as well.
Most of the time, they are not square. Look at a bluestone patio, and stand at one end and look at the lines of the joints. They should be straight and even. Yet because bluestone is not always cut properly at the quarry, the pieces are not exactly straight. If used as is, your joint lines will not be straight either.
Delaware Landscaping - How to Build a Hardscape Patio: This article provides an overview of the process used in creating a hardscape brick paver patio. The basic supplies needed include the selected pavers, crushed stone, paver base, long 1 inch conduit pipes, leveling board, and edge restraints. Tools needed include a compactor, cutoff saw, shovels, etc. We explain the basic steps, giving some basic knowledge that is useful if selecting a contractor to do the \"heavy lifting,\" so you'll know what questions to ask. The discussion is based on Interlocking Concrete Pavement Institute (ICPI) standards that should be used by any dependable contractor.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does CraftShop claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.